This is a list of classified advertisements to save you time & money.

 

    A comprehensive alphabetical list of photographic terms and meanings.

E6:- Kodak's standard chemical process for developing Ektachrome or compatible slide films from other films makers apart from Kodak.

 

Easel:- A device to hold photographic paper flat during exposure, usually equipped with an adjustable metal mask for framing.

 

Eberhard effect:- border effect occurring in a developed image. It appears as a dense line along an edge of high density and as a light line along an edge of low density. It occurs most often in plates developed flat in solution that is not sufficiently agitated. The effect was described by Gistav Eberhard in 1926.

 

Edge numbers:-reference numbers printed by light at regular intervals along the edge of 35mm and roll films during manufacture.

 

ED:- Extra Low dispersion - usually refer to glass type. Glass with ED properties indicating special rare earth glass or special formulated glass that limiting or correcting of light rays passing through the lens elements to achieve all spectrum of colours to falls on the same plane of focus - especially the Red and Blue spectrum and is usually more apply to longer focal length lenses where the problem is more serious. First popularised by Nikon's Nikkor lens line - with a gold lining in the front part of the lens. Pentax, Olympus use the same name as Nikon. Canon's version is called "LD" - with red lining and usually their lenses are white in color. While Minolta uses APO. Independent lens makers, like Tamron, uses LD, Sigma uses APO, Tokina's version is SD APO; all these trade names are basically performing the same functions. Also please refer to "apodchhromatic" . Check Nikon's terms page for more.

 

Effective aperture:-ECG technology Enhanced Cubic Grain A technology that provides amplified sharpness in Kodak Advantix 100-speed film.

 

Electrical:- The electrical performance of the tape samples is measured and compared to the VHS-standard reference tape (the JVC VRT-2). The published numbers represent how much better (+) or worse (-) then the industry standard tape each tape sample performed (the JVC VRT-2 scores 0.0 for every parameter). The diameter of the bundle of light rays striking the first lens element that actually pass through the lens at any given diaphragm setting.

 

EIS:- Electronic Image Stabiliser. Feature that minimises effect of camera shake. Originally designed for video cameras. Canon has transfer the technology over to its EF lenses, we expect more Canon's EF lenses will adopt this feature.

 

Electroluminescence:- conversion of electric energy directly into visible light.

 

Electronic flash:- Light source based on electrical discharge across two electrodes in a gas-filled tube. Usually designed to provide light approximating to daylight. It is often regarded as artificial light souce in the dark. Electronic flash requires a high voltage, usually obtained from batteries through a voltage-multiplying circuit. It discharges a brief, intense burst of light, usually used where the lighting on the scene is inadequate for picture-taking. They are generally considered to have the same photographic effect as daylight. Most flash will correct the color temperature back to 5000 kelvin - the daylight color. You can play around with filters mounting on the flash head for some specific effects or alter the color if necessary. Modern flash has multiple TTL flash exposure control functions and even extend to autofocus control. Some specialized flash are high speed repeating flash which can use for strobocopic effect, UV-flash for ultra violet light photography etc.

 

Electronic shutter:- shutter system timed by electronic rather than mechanical means.

 

Electrophotography:- creation of images by alteration to the electrical properties of the sensitive material as a result of the action of light.

 

Element:- Single lens used in association with others to form a compound construction.

 

Elon:- another term for Methylaminophenol sulfate. It is more commonly known as metol.

 

Emulsion:- Micro-thin layers of gelatin on film in which light-sensitive ingredients are suspended; triggered by light to create a chemical reaction resulting in a photographic image. Basically, suspension of light-sensitive silver salts in gelatin.

 

Emulsion Side:- The side of the film coated with emulsion. In contact printing and enlarging, the emulsion side of the film-dull side-should face the emulsion side of the photo paper-shiny side.

 

Endoscope:- optical device allowing the viewing and photography of small inaccessible subjects.

 

Enhanced Back-Printing:- An Advanced Photo System feature available in some system cameras that enables users to encode detailed information at the time of picture-taking, such as the date and time of exposure, camera settings, roll title or other custom information for subsequent printing onto the back of their photographs.

 

Enlargement:- A print that is larger than the negative or slide; also see "blowup".

 

Enlargement ratio:- ratio denoting the amount of linear (not area) enlargement between a print and the negative from which it is made.

 

Enlarger:- A device consisting of a light source, a negative holder, and a lens, and means of adjusting these to project an enlarged image from a negative onto a sheet of photographic paper.

 

Enprint:- small enlarged print, with dimensions of a fixed ration, produced commercially in an automatic printer. Usually 3 ½" wide.

 

Entrance pupil:- size of the beam of light which, entering the elements of a compound lens that are in front of the aperture, completely fills the iris diaphragm.

 

Equivalent focal length:- distance in a lens between the front nodal point and the focal plane when the lens is set to focus a subject at infinity. In a telephoto lens the equivalent focal length is shorter than the back focus. The reverse is true in a wide angle lens.

 

Etch:- process of removing small imperfections in a print or negative by scraping away part of the emulsion.

 

Etching:- dissolving away selected areas of a surface while shielding the other portions with a resistant. The process is used as a creative drawing medium as well as for making half-tone plates on copper or zinc.

 

Ever-ready case:- camera case that can be opened, allowing the camera to be used without removing it. A front flap hinges down to uncover the lens, viewfinder and camera controls.

 

Everset shutter:- simple camera shutter mechanism on which a single depression of the release both tensions and fires the shutter EV:- Exposure value. Method of quantifying scene brightness. Most of these value apply to metering cells, how high or low eg. a metering that can handles from EV1-EV21 means a metering system that can measure brightness level from just above the light level of a candle light to a brightly sunlight scene on a beach. Camera metering can handle more weakly on a spot meter than, say, a center weighted average metering system. EV is commonly used in black & White photographic process. At ISO 100, the combination of a one-second shutter speed and an aperture of F1.4 is defined as EV1. The camera may be used only within the EV range of the exposure meter. For example, the exposure metering range s from EV0 to EV20 can be used on a camera, means the camera's meter can handle broader range of exposure latitude.

 

Existing Light:- Available light. Strictly speaking, existing light covers all natural lighting from moonlight to sunshine. For photographic purposes, existing light is the light that is already on the scene or project and includes room lamps, fluorescent lamps, spotlights, neon signs, candles, daylight through windows, outdoor scenes at twilight or in moonlight, and scenes artificially illuminated after dark.

 

Exit pupil:- image of the iris diaphragm formed on the back surface of a compound lens by the elements behind the aperture.

 

Expiry date:- date stamp on most film boxes indicating the useful life of the material in terms of maintaining its published speed and contrast.

 

Exposure:- The quantity of light allowed to act on a photographic material; a product of the intensity (controlled by the lens opening) and the duration (controlled by the shutter speed or enlarging time) of light striking the film or paper. The act of allowing light to reach the light-sensitive emulsion of the photographic material. Also refers to the amount (duration and intensity) of light which reaches the film.

 

Exposure bracketing:- Shooting the same subject at a range of different exposures. Some camera provides Auto Exposure Bracketing/Flash Exposure Bracketing.

 

Exposure compensation:- Exposure compensation for available light is activated by changing the shutter speed and/or lens aperture. This is done by using AE L AF-L (Auto Exposure/Autofocus Lock) button or exposure compensation button, or by Auto Exposure Bracketing . In flash photography with a dedicated TTL Speedliqht exposure compensation can also be performed by varying the amount of flash output. Camera-originated exposure compensation affects both the foreground subject and the background; variations in flash output amount affect only the foreground.

 

Exposure factor:- A figure by which the exposure indicated for an average subject and/or processing should be multiplied to allow for non-average conditions. Usually applied to filters. Occasionally to lighting. Processing, etc Not normally used with through-the-lens exposure meters.

 

Exposure Latitude:- The range of camera exposures from underexposure to overexposure that will produce acceptable pictures from a specific film.

 

Exposure Meter:- An instrument with a light-sensitive cell that measures the light reflected from or falling on a subject, used as an aid for selecting the exposure setting. The same as a light meter.

 

Exposure value (EV):- scale of values used to indicate the sensitivity range of a TTL or off-camera meter system within which accurate exposure measurement is guaranteed.

 

Extension bellows:- device used to provide the additional separation between lens and film required for close-up photography.

 

Extension bellows:- Device used to provide the additional separation between lens and film required for close-up photography. Consists of extendible bellows and mounting plates at front and rear to fit the lens and camera body respectively.

 

Extension tubes:- metal or plastic tubes used on small format cameras, to extend lens-to-film distance, enabling magnification greater than 1x.

 

Extinction meter:- early type of exposure calculator.